Option B: Standalone Environment Login Steps - Cisco Linksys Business Series Network Storage System NSS4000 Getting Started Manual

Option B: Standalone Environment Login Steps

To log into the configuration interface:
1. If you are logging into the NSS for the first time, write down the MAC address located on the
sticker attached to the bottom of the chassis. You need the MAC address as this is part of the
default hostname. Otherwise, skip this step.
2. There are a variety of ways to display the NSS Login window.
• Open the Web browser on your computer: In the Address field, enter "http://NAS<MAC
address>" (For example, "http://NAS0018F804E44C".)
• Browse for the NSS from the My Network Places window.
• Select the NSS to a network drive from a mapped network drive.
The NSS Login window appears:
3. Enter the administrator login information. When you first log into the configuration interface or
if you reset the factory defaults, both the username and password are set to "admin".
4. Click OK.
Chapter 3: Configuring the Network Storage System
(NSS)
Chapter
Getting Started Guide
17
3