Chapter 4
T3 Dial Feature Card
Figure 4-12 Tighten the Captive Screws on the Cisco AS5400
Check the card LEDs to verify that the card is working properly. For information about dial feature card
Step 5
LEDs, refer to
Getting Help
For information about technical support, onsite service, and exchange and repair services, refer to the
"Obtaining Technical Assistance" section on page -xii
Where to Go Next
The remaining chapters of this guide include information on installing and troubleshooting DFCs and
creating cables.
•
•
•
78-13311-01
Captive
Captive
screw
screw
Chapter 6, "Troubleshooting"
Chapter 5, "Universal Port Dial Feature Card."
Chapter 6, "Troubleshooting."
Appendix A, "Cabling Specifications."
in the "Preface."
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
Getting Help
4-7