Spe Firmware; Getting Help; Where To Go Next; Chapter 6 Troubleshooting - Cisco AS5400 Installation Manual

Chapter 5 Universal Port Dial Feature Card

SPE Firmware

SPE firmware is automatically downloaded to a universal port DFC from the Cisco IOS image when you
boot the system for the first time, or when you insert a universal port DFC while the system is operating.
When you insert DFCs while the system is operating, the Cisco IOS image recognizes the cards and
downloads the required firmware to the cards.
For more information on universal port software and upgrade options, refer to the Cisco AS5350 and
Cisco AS5400 Universal Gateway Software Configuration Guide.
For information on managing universal port services, refer to Managing Port Services on the Cisco 5350
Universal Gateway and Managing Port Services on the Cisco AS5400 Universal Gateway.

Getting Help

For information about technical support, onsite service, and exchange and repair services, refer to the
"Obtaining Technical Assistance" section on page -xii

Where to Go Next

The remaining chapters of this guide include information on troubleshooting DFCs and creating cables.
•
•
78-13311-01
Chapter 6, "Troubleshooting."
Appendix A, "Cabling Specifications."
in the "Preface."
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
SPE Firmware
5-9