Installation; Upgrade Notes; Install Firmware Release On Cisco Unified Communications Manager - Cisco 6900 Series Release Notes

Cisco Unified IP Phone 6900 Series Release Notes for Firmware Release 9.4(1)

Installation

Upgrade notes

Direct upgrades, using signed load files, are supported to Firmware Release 9.4(1) from 9.x. You can use the
following firmware release file for these direct upgrades.
Firmware Release 9.4(1) only applies to the Cisco Unified IP Phone 6921, 6941, 6945, and 6961 (SCCP
Note
and SIP).
• For Cisco Unified IP Phone 6921, 6941, and 6961:
• For Cisco Unified IP Phone 6945:

Install firmware release on Cisco Unified Communications Manager

Before using the Cisco Unified IP Phone Firmware Release 9.4(1) with Cisco Unified Communications
Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the
cluster.
Note Firmware Release 9.4(1) only applies to the Cisco Unified IP Phone 6921, 6941, 6945, and 6961.
Procedure
Step 1 Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=282677102&i=rm
Step 2 Choose your phone model.
Step 3 Choose one of the following firmware types:
• Skinny Client Control Protocol (SCCP) Software
• Session Initiation Protocol (SIP) Software
◦ cmterm-69xx-sccp.9-4-1-1.cop.sgn
◦ cmterm-69xx-sip.9-4-1-1.cop.sgn
◦ cmterm-6945-sccp.9-4-1-1.cop.sgn
◦ cmterm-6945-sip.9-4-1-1.cop.sgn
Cisco Unified IP Phone 6900 Series Release Notes for Firmware Release 9.4(1)
Installation
7