Table of Contents
Advertisement
INTELLIDOX DOCKING MODULE
SAFETY SUITE DEVICE CONFIGURATOR AND SAFETY SUITE SOFTWARE
9.
The Saving To IntelliDoX progress screen is displayed.
10. When the operation is complete, the IntelliDoX Device Configuration dialog box is
displayed.
11. Verify that the new data and time settings are displayed on the selected modules.
Set the Time Zone on Safety Suite Device Configurator software
1.
Open the Safety Suite Device Configurator software, and then log in with your
username and password.
2.
Click the Devices tab, and verify the IntelliDoX you want to communicate with is
added and visible.
3.
From the ACTIONS column, expand ACTIONS and select Device Details. The
IntelliDoX Configuration panel is displayed.
4.
Click Language – Timezone Preferences and select the appropriate time zone for
your IntelliDoX. You can also check the Automatically adjust clock for Daylight
Savings Time check box if needed.
Clock Adjustment for Daylight Saving Time
After you configure the module time using the Safety Suite Device Configurator software,
you can use the Safety Suite Device Configurator to configure the module and detector
clocks to automatically adjust for daylight saving time.
1.
Setting the Module Time.
2.
Select the tab for a compatible detector and then select the IntelliDoX Configuration
tab for the compatible detector.
HONEYWELL
USER MANUAL || CONFIGURE SETTINGS VIA
PAGE 71 OF 119
Advertisement
Table of Contents
