Table of Contents
Advertisement
5.
Raise the handles, and then insert them into the
base unit.
A
NOTICE:
Do not allow the cords inside area "A"
in the figure. Long objects may be entangled with the
cords and cause accidents.
NOTICE:
Do not apply excessive force to the
cords when raising and inserting the handles.
NOTICE:
Be sure to raise the handles with both
hands.
6.
Open the carrier frame toward the front.
1
► 1 . Carrier frame
7.
Unfold the handles, then insert the long hexagonal
bolts into the base unit, and then tighten the nuts with
the wrench included in the package.
1
► 1 . Long hexagonal bolt
8.
Tighten the shoulder bolts from the rear using the
wrench included in the package.
► 1 . Shoulder bolt
9.
Tighten the short hexagonal bolts from both sides
using the wrench included in the package to fix the
handles.
1
► 1 . Short hexagonal bolt
NOTICE:
Do not tighten the short hexagonal
bolts with excessive force. Tighten them with
proper force so that the handles are stably fixed.
NOTICE:
Do not pinch the cords with the bolts.
10. Fix the cords with the clamps.
9 ENGLISH
1
1
1
Advertisement
Table of Contents
