Led Light; Extension Wand - Makita XCV05 Instruction Manual

1
2
► 1. Hose band 2. Free nozzle

Extension wand

The length of the wand can be adjusted. Loosen the
ring on the wand and adjust the wand length. Tighten
the ring at your desired length.
► 1. Ring
Switch action
To start the cleaning, press
uum cleaner will start in higher suction power (2). If you
want to lower the suction power, press
more time. The vacuum cleaner will operate in normal
suction power (1). When you press the button while the
vacuum cleaner is running, the suction power switches
between higher and normal suction power. To turn off
the vacuum cleaner, press
1
button once. The vac-
button one
button.

LED light

LED light is installed in the head of the switch box to
ease the operations in dark places. Press
turn the light on. To turn off, press
CAUTION:
Do not look in the light or see the
source of light directly. Never aim the light to
other people's eyes.
NOTE: The LED light is automatically turned off when
the vacuum cleaner is not operated for more than 10
minutes.
NOTE: The vacuum cleaner will automatically
switches off and the LED light flashes when the vac-
uum cleaner is overheated due to the reduced air-flow
into the machine caused by clogged hose, pipe, filter
or other reasons.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Assembling hose/wand/nozzle
Connect the vacuum cleaner body with the hose,
wand and nozzle. Insert the hose cuff into the vacuum
cleaner body and turn it clockwise. Connect the nozzle
to the extension wand. After that, shoulder the vacuum
cleaner body then connect the hose with the extension
wand.
7 ENGLISH
button to
button again.