Led Light - Makita GCV08PM Instruction Manual

Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
Fig.8
► 1. Carrying hook
Switch action
To start the cleaner, simply press
off, press button again.
You can change the suction power of the cleaner in four
steps by pressing button. Each press on this button
repeats the 1 to 4 mode in a cycle.
Fig.9
► 1. Suction power change button
button
Level
1
2
3
4
1
button. To switch
1
2
2. ON/OFF
Indication Mode
Quiet mode
Normal speed
mode
High speed mode
Max speed mode
NOTE: You can change the suction power before
turning on the cleaner.
NOTE: The cleaner starts the operation with the
same suction power as the last operation.
NOTE: If you remove the battery immediately after
turning off the appliance, while the motor is rotating,
the cleaner may not start the operation with the same
suction power as the last operation.

LED light

LED light is installed in the head of the switch box
to ease the operations in dark places. Press and
hold button to turn the light on. To turn off, press and
hold button again.
Fig.10
CAUTION:
Do not look in the light or see the
source of light directly. Never aim the light to
other people's eyes.
NOTE: The LED light is automatically turned off when
the vacuum cleaner is not operated for more than 10
minutes.
Hose band
Hose band can be used for holding the hose or flexible
rubber nozzle.
To secure the hose to the vacuum cleaner body, pass
the hose band through the slot on the body. You can
attach the hose band on either side.
1
Fig.11
► 1. Hose band 2. Slot 3. Hose
9 ENGLISH
3
2