Operation - Makita XCV05 Instruction Manual

When using the dust bag (optional accessory), insert
the brim of the dust bag into the slit.
1
2
► 1. Slit 2. Brim
3. Align the hole of the filter bag with the hose cuff
and push the cardboard portion to the end. Make sure
that the rubber ring on the filter bag goes over the rim
on the hose cuff.
1
► 1. Rubber ring on the filter bag 2. Rim on the hose
cuff 3. Cardboard portion of the filter bag 4. Hose
cuff

OPERATION

WARNING:
Operators shall be adequately
instructed on the use of the vacuum cleaner.
WARNING:
This vacuum cleaner is not suit-
able for picking up hazardous dust.
1
2
3
4
9 ENGLISH
CAUTION:
This cleaner is for dry use only.
CAUTION:
This cleaner is for indoor use only.
CAUTION:
Always insert the battery cartridge
all the way until it locks in place. If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
1. Shoulder the vacuum cleaner body and fas-
ten upper and lower belts. Adjust the tightness as
necessary.
2.
Press button to start cleaning. If you want to
lower the suction power, press
time. Press button to stop.
During cleaning, hook the switch box on the lower belt.
The hook can be slanted for lighting forward.
When you suspend the operation, the hook on the hose
can be used for hanging the wand on the lower belt.
button one more