Related Manuals for Makita XCV11Z
Summary of Contents for Makita XCV11Z
- Page 1 INSTRUCTION MANUAL Cordless Portable Vacuum Cleaner XCV11 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model: XCV11 Maximum air volume Normal (1) 1.3 m /min (46 cu.ft/min) High (2) 1.6 m /min (57 cu.ft/min) Vacuum Normal (1) 42 hPa High (2) 67 hPa Recoverable capacity Dust 7.5 L (2.0 gal.) Water 4.5 L (1.2 gal.) Dimensions (L x W x H) 418 mm x 251 mm x 278 mm... - Page 3 Do not put any object into openings. Dehumidifier • Do not use with any opening blocked; Large amount of powder (flour, • keep free of dust, lint, hair, and any- fire extinguisher powder, etc.) thing that may reduce air flow. Substances that cause toxic •...
- Page 4 Use appliances only with specifi- Symbols cally designated battery packs. Use of any other battery packs may create The followings show the symbols used for tool. a risk of injury and fire. When battery pack is not in use, volts keep it away from other metal objects, like paper clips, coins, direct current...
-
Page 5: Functional Description
It will ► 1. Battery cover also void the Makita warranty for the Makita tool and charger. NOTE: The battery cover is locked when you open it up to the upright position. -
Page 6: Overload Protection
Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. - Page 7 To start the cleaner, set the switch lever to "1" or "2" side. Indicating the remaining battery To turn off the cleaner, set the switch lever to "O" side. capacity ► 1. Switch lever ► 1. Battery indicator 2. Check button Auto-suction stop during wet Press the check button to indicate the remaining battery suction operation...
-
Page 8: Parts Description
For vacuum cleaning PARTS DESCRIPTION Insert the hose into the suction inlet and turn it clock- wise until it clicks. ► 1. Suction inlet For blowing Insert the hose to blower outlet and turn it clockwise until it clicks. ► 1. Tank cover 2. HEPA filter 3. Damper 4. Prefilter 5. -
Page 9: Connecting The Tool
Connecting the nozzle Storage of hose and nozzles Attach the wide nozzle, sash nozzle, or other nozzles The hose and nozzles can be stored on the tool as supplied as optional accessories depending on your illustrated. purpose. To attach the nozzle, twist and insert it to the end of the hose. -
Page 10: Operation
If foreign objects are blown into eyes, it repairs, any other maintenance or adjustment should may result in personal injury. be performed by Makita Authorized or Factory Service CAUTION: Always use protective goggles, a Centers, always using Makita replacement parts. - Page 11 Unhook and lift up the tank cover. To remove dust adhering to the HEPA filter, shake Shake off the dust from the HEPA filter and then dis- the frame bottom quickly several times. pose of the dust from the tank. Occasionally wash the HEPA filter in water, rinse and dry thoroughly in the shade before use.
-
Page 12: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.