Installing The Fans; Figure 6-3 Fixing The Cabinet To The Floor; Figure 6-4 Cutouts In Drive Roof - Back (A) And Front (B) - ABB ACS1000i User Manual

3. Fix the cabinet to the floor.
NOTE – Floor fixings are not supplied.
4. Anchor bolts as illustrated, or screws and nuts of size M16 are recommended.
5. Insert the screws from the ends of the cabinet base or via the holes inside the cabinet.
Figure 6–3 Fixing the cabinet to the floor

6.6. Installing the fans

Fan units are installed over the 4 cutouts in the drive roof. The 2 cutouts on the left are for
large or small fans with an additional base plate and the 2 cutouts on the right are only for
small fans.
4
Figure 6–4 Cutouts in drive roof - back (A) and front (B)
1) Cutouts for large or small fans
2) Cutouts for small fans
3) Shock absorbers for fan unit
PRODUCT
ACS1000i
1
DOCUMENT KIND
User manual
A
3
1
5
B
4) Holes for fan motor cables
5) Holes for fan-mounted shock absorbers
DOCUMENT ID.
3BHS206977 E01
MECHANICAL INSTALLATION
2 2
REV. LANG. PAGE
J en 67/146
4