Parameters Mode; Table 10-1 Parameter Groups - ABB ACS1000i User Manual

2. To reset the fault, press the RESET key.

10.3.3. Parameters mode

NOTICE
Running the drive system with incorrect data can result in improper operation,
reduction of control accuracy and damage to equipment.
▶ Parameters must only be set by qualified personnel.
▶ DO NOT change any parameter, if the meaning of the parameter and the
effects of the change are not fully understood.
10.3.3.1. Overview
If the parameter lock is disabled or unlocked (see section 10.3.3.3, Enabling / unlocking a
parameter lock, page 114), the parameters mode allows entering the parameter settings
for the required drive configuration depending on the application.
The parameters are organized in functional groups, so called parameter groups.
Table 10–1 Parameter groups
Group Description
Group 07 Control words
Group 08 Status words
Group 09 Fault and alarm words
Group 11 Start, stop, direction, MCB and control
Group 12 Reference selection
Group 13 Basic analog inputs
Group 14 Basic digital outputs
Group 15 Basic analog outputs
Group 16 System control inputs
Group 17 Utilities
Group 18 Process speed
Group 19 Data storage
PRODUCT
ACS1000i
1 L -> 600.0 rpm 0
Status Rdy to Strt
MotorSpeed 0.0 rpm
Power 0.0 %
Risk of component damage.
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS206977 E01
CDP CONTROL PANEL
REV. LANG. PAGE
J en 110/146