Terms And Definitions; Table 1-1 Terms And Definitions - ABB ACS1000i User Manual

1.3. Terms and definitions

For the purposes of this document, the following terms apply. Some of these terms are
unique to ABB and might differ from the normal usage.
Table 1–1 Terms and definitions
Term
ACS1000i
AMC circuit board
Cluster
CDP
DDCS
Drive
Drive system
DriveBus
DriveDebug
DriveWindow
Equipment
EMC
Ground
To ground
INU
IOEC module
Line voltage
PRODUCT
ACS1000i
Definition
ACS1000i fully integrated air-cooled drive with input transformer.
Application and Motor Controller
The digital signal processor is the heart of the control system of the drive.
A cluster is a synonym for a group of hardware modules of the drive
control system.
Control and display panel
Basic user interface for operating and monitoring the drive when local
operating mode is selected.
Distributed drive control system
DDCS is an acronym for a serial communication protocol designed for data
transfer via optical fibers.
Short form for ACS1000i drive
The drive system includes all equipment used to convert electrical into
mechanical power to give motion to the machine.
Communication link dedicated for ABB drives
DriveDebug is part of ABB's DriveWare® software tools for drives using the
DDCS communications protocol. DriveDebug runs on computers with
Windows® operating systems. DriveDebug is a specialist's tool used to
diagnose, tune and troubleshoot ABB drives.
DriveWindow is a DriveWare® product. DriveWindow is a 32 bit Windows®
application for commissioning and maintaining ABB drives equipped with
optical communication links.
Frequency converter and related equipment
Electromagnetic compatibility
All measures to suppress electromagnetic disturbances caused by
different electrical equipment in the same electromagnetic environment,
and to strengthen the immunity of the equipment to such disturbances.
Earth
The conducting path (eg, conductor) between the electric equipment (eg,
frequency converter) and the earth. The electric equipment is connected to
the earth, eg, by a grounding set or a grounding switch.
Inverter unit of the drive. The INU converts the DC voltage to the required
AC motor voltage and frequency.
The IOEC module is an active input and output device for digital and
analog signals.
RMS voltage of the main power supply of the drive
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS206977 E01
ABOUT THIS MANUAL
REV. LANG. PAGE
J en 4/146