6. Mechanical installation
6.1. Safety
All installation work must be carried out by qualified personnel according to the
site and equipment requirements and in compliance with local regulations.
6.2. Overview of installation work
The installation includes the following work:
– Preparing the floor, page 66
– Fixing the cabinet to the floor, page 66
6.3. General notes on installation
NOTICE
Foreign matter and particularly metallic dust can cause failure and damage when
the drive is energized.
▶ Close the doors and cover openings completely when work is discontinued.
▶ Retrieve any foreign matter which accidentally dropped into the cabinet.
6.3.1. Dimensions and clearances
See "Appendix C - Mechanical drawings" for information on:
– Cabinet dimensions
– Clearances to be observed
– Mounting hole sizes
6.3.2. Cabinet roof
The cabinet roof is not designed as a mounting base for, eg, foreign devices, cable ducts.
Therefore, it is not permitted to install any foreign device on the roof.
6.3.3. Fire protection
– To prevent fire spreading into the drive, apply suitable fire protection measures.
6.3.4. Cable duct material
– Use non-flammable material with non-abrasive surface.
– To prevent dust, humidity and animals entering the cabinet, protect the cable entries.
PRODUCT
ACS1000i
Risk of component damage.
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS206977 E01
MECHANICAL INSTALLATION
REV.
LANG.
PAGE
J
en
65/146