11.6.10. Inspecting and replacing batteries
Figure 11–6 Control compartment – battery location
1) Power supply unit for battery pack 1
2) Alarm LED
11.6.10.1. Checking and replacement indications
The end of the battery life is indicated as follows:
– CDP control panel displays an alarm message.
– Alarm LED on the power supply unit for the battery lights up (2 in Fig. 11–6).
When the end of the battery life is indicated, the drive continues to operate until the time
set with parameter
145.26 Batt-Alm.Tim-out
ABB recommends replacing all of the batteries when one battery is at end-of-life.
PRODUCT
ACS1000i
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
3
3) Battery pack 1
has elapsed.
DOCUMENT ID.
3BHS206977 E01
1
2
REV.
LANG.
PAGE
J
en
140/146