Actual Signals Mode - ABB ACS1000i User Manual

After 2 to 3 seconds, information on the drive (1, 2) and the drive identification (3) is
displayed.
1
ACS1000 xxxx
2
<Device Name>
3
ID-NUMBER 1
After another few seconds:
1 L -> 0.0 rpm
Status InitSeq....
MotorSpeed 0.00 rpm
Power 0.0 %
After another few seconds, the display changes to the actual signals mode.
1 L -> 0.0 rpm
Status ErthIsoClos
MotorSpeed 0.00 rpm
Power 0.0 %

10.3.2. Actual signals mode

10.3.2.1. Overview
Two displays can be selected in the actual signals mode:
– Actual signals display
– Fault memory display
The actual signals display appears first when entering the actual signals mode. However,
when the drive is in a fault condition, the fault memory display appears instead.
The actual signals display is used to monitor the drive without interfering with its
operation. It continuously displays three selectable actual values.
The CDP control panel automatically returns to the actual signals display from other modes
if no key is actuated within one minute (an exception from this is the fault memory display).
PRODUCT
ACS1000i
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS206977 E01
CDP CONTROL PANEL
REV. LANG. PAGE
J en 103/146