Figure 4-8 Ioec Module Identification; Table 4-6 Ioec Module Identification - ABB ACS1000i User Manual

4.3.1.4. I/O device identification
The I/O modules are identified on the part with an identification label (1 in Fig. 4–8), in the
wiring diagram, and in the software by the wiring diagram identification number (2 in
Fig. 4–8).
Figure 4–8 IOEC module identification
1) Identification label
The way the identification number is built directly corresponds to the wiring diagram as can
be seen in Fig. 4–8. The letter A represents the kind of part we have, an assembly, the next
three digits are the page number the part is located on, page 191, and the last digit, 1, means
that our part is the first assembly on the page. This identification label number is the key to
track electrical devices throughout the drive and in the ABB documentation.
The designation for each IOEC module is shown in Table 4–6.
Table 4–6 IOEC module identification
I/O module type
IOEC1
IOEC2
IOEC3
IOEC4
PRODUCT
ACS1000i
1
A5191
Wiring diagram designation for module identification
A5191
A5201
A5211
A5221
DOCUMENT KIND
User manual
2
A5191
2) Identification number
DOCUMENT ID.
3BHS206977 E01
CONTROL SYSTEM
REV. LANG. PAGE
J en 57/146