Figure 11-8 Lifting Point Locations On Fan Unit - ABB ACS1000i User Manual

4. Unbolt the top plate of the fan unit.
13 mm
5. Install the RUD bolt-on lifting points on the top plate of the fan unit (circles).
You can use one of the following configurations:
• 2 diagonal corners for 2 leg lifts
• 4 corners for 4 leg lifts
NOTE – The RUD lifting points are in the loose parts that were delivered with the drive.
ABB ID: 3BHE015753P0008
RUD lifting point M8 0.4 t
Figure 11–8 Lifting point locations on fan unit
6. Attach lifting gear to 2 diagonal lifting points or all 4 lifting points.
7. Lift the top plate off of the fan unit.
NOTE – The impeller motor remains attached to the top plate.
PRODUCT
ACS1000i
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
DOCUMENT ID.
3BHS206977 E01
REV. LANG. PAGE
J en 143/146