Troubleshooting - Makita EB5300TH Original Instruction Manual

-
Inspect /
clean
Combustion Inspect /
chamber / clean
valve / port
Engine Overhaul
Carburetor Drain fuel

TROUBLESHOOTING

in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers,
always using Makita replacement parts for repairs.
Engine does not start.
Before
- -
- -
- -
- -
Failure to operate primer pump. Push 7 to 10 times.
Low pulling speed of starter rope. Pull strongly.
Lack of fuel.
Bent fuel tube.
Deteriorated fuel.
Excessive suction of fuel.
Detached plug cap.
Contaminated spark plug.
Abnormal clearance of spark plug. Adjust clearance.
Other abnormality of spark
plug.
Abnormal carburetor.
Cannot pull the starter knob.
Engine internal parts
problem.
- -
- -
- -
- -
Feed fuel.
Straighten the fuel tube.
Deteriorated fuel makes starting
Set throttle lever from medium speed to high
speed, and pull starter handle until engine
starts. If engine will not start still, remove spark
plug, make electrode dry, and reassemble them
Attach securely.
Clean the spark plug.
Replace the spark plug.
Ask our authorized service center to
inspect and repair it.
Ask our authorized service center to
inspect and repair it.
Ask our authorized service center to
inspect and repair it.
25 ENGLISH
-
(Note2)
-
(Note2)
-
(Note2)
- -
Before
-
-
-
(Note3)