Makita EB5300TH Original Instruction Manual page 16

Fastener
Optional accessory
The hip belt enables the operator to carry the
tool more stably.
CAUTION:
dle along the swivel pipe to the most comfortable
position. Then tighten the control handle with the
clamp screw.
Clamp screw
1
Move the control han-
1
assembly along the swivel pipe to the most com-
fortable position. Then tighten the handle with
the clamp screw.
Clamp screw
Adjust the angle of the control arm.
Control arm
While operating the blower, adjust the throt-
tle trigger / throttle lever so that the wind force is
appropriate for the work location and conditions.
Adjusting engine speed.
increases by pulling the throttle trigger. To
decrease the engine speed, loosen the throttle
trigger.
16 ENGLISH
Move the handle
1
Engine speed
1