Makita DLS110 Instruction Manual page 22

Tool / battery protection system
matically stop during operation if the tool or battery is
placed under one of the following conditions:
Overload protection
When the tool is operated in a manner that causes it to
draw an abnormally high current, the tool automatically
stops without any indication. In this situation, turn the
tool off and stop the application that caused the tool to
Overheat protection
On
When the tool is overheated, the tool stops automati-
cally, and the battery indicator blinks about 60 seconds.
In this situation, let the tool cool down before turning the
tool on again.
Overdischarge protection
When the battery capacity becomes low, the tool stops
automatically. If the product does not operate even
when the switches are operated, remove the batteries
from the tool and charge the batteries.
Indicating the remaining battery
capacity
Fig.9: 1. Battery indicator 2. Check button
Press the check button to indicate the remaining battery
battery.
Battery indicator status
On Off
-
-
Blinking
Remaining
battery
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Fig.10: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
light up for a few seconds.
Indicator lamps
Lighted
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Automatic speed change function
Fig.11: 1. Mode indicator
Mode indicator status
On
depending on the work load. When mode indicator
mode.
Blade guard
Fig.12: 1. Blade guard
When lowering the handle, the blade guard rises auto-
its original position when the cut is completed and the
handle is raised.
WARNING:
guard or the spring which attaches to the guard.
22 ENGLISH
Off Blinking
Operation mode
Off
High speed mode
Never defeat or remove the blade
Remaining
capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
may have
malfunctioned.