Honda CR-V 2017 Manual page 80

Malaysian models
■
Locations for Child Restraint System Installation
*1: When installing a child restraint system, adjust the seat slide to the most rear position and adjust the seat back to the most upright
position.
*2: If you can not fix the child restraint system stably, adjust the seat back angle to be parallel with the back side of the child restraint
system, still keeping it forward of the seat belt shoulder anchor.
*4: Suitable for particular child restraint systems given on attached list. These restraints may be of the "specific", "restricted" or "semi-
universal" category.
Child restraint systems with support legs can be installed on non i-Size seating positions. However, the centre seat is excluded.
Suitable for universal restraint systems installed with vehicle safety belts.
Suitable for forward facing universal restraint systems installed with vehicle safety belts.
Suitable for particular child restraint systems given on attached list.
These restraints may be of the "specific", "restricted" or "semi-universal" category.
Suitable for i-Size and ISOFIX child restraints systems.
Suitable for forward facing restraint systems only.
Never use a rearward facing child restraint system.
Seat position equipped with Top Tether anchorages.
uuChild SafetyuSafety of Infants and Small Children
Continued 79