Honda CR-V 2017 Manual page 641

uuIf the Battery Is Deadu
■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order:
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
640
1What to Do After the Engine Starts
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow (LSF) * , Road Departure
Mitigation System * , Vehicle Stability Assist (VSA)
system, VSA OFF, Collision Mitigation Braking System
(CMBS) * , low tyre pressure/Tyre Pressure Monitoring
System (TPMS) * , and Parking Brake and Brake System
(Amber) may come on along with a message in the
Driver Information Interface * when you set the power
mode to ON. after reconnecting the battery.
Drive a short distance at more than 20 km/h. The
indicator should go off. If it does not, have your
vehicle checked by a dealer.