Honda CR-V 2017 Manual page 515

uuWhen DrivinguTyre Pressure Monitoring System (TPMS)
■
TPMS Initialisation
You must start TPMS initialisation every time you:
• Adjust the pressure in one or more tyres.
• Rotate the tyres.
• Replace one or more tyres.
Before initialising the TPMS:
• Set the cold tyre pressure in all four tyres.
2 Checking Tyres P. 594
Make sure:
• The vehicle is at a complete stop.
• The shift lever is in ( P .
• The power mode is in ON.
514
*
1TPMS Initialisation
The initialisation process requires approximately 30
minutes of cumulative driving at speeds between
48−105 km/h.
During this period, if the ignition is turned on and the
vehicle is not moved within 45 seconds, you may
notice the low tyre pressure indicator comes on
briefly. This is normal and indicates that the
initialisation process is not yet complete.
If the snow chains are installed, remove them before
initialising the TPMS.
If the low tyre pressure/TPMS indicator comes on
even when the properly inflated specified regular
tyres are installed, have the vehicle checked by a
dealer.
We recommend that the tyres be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.