Honda CR-V 2017 Manual page 628

■
Injecting Sealant and Air
Tyre Valve Stem
Valve Cap
Bottle Tyre
Valve
Air
Compressor
Hose
Sealant Bottle
Tyre Valve Stem
Sealant/air hose
1. Remove the valve cap from the tyre valve
stem.
2. Shake the sealant bottle.
3. Attach the air compressor hose onto the
bottle tyre valve. Screw it until it is tight.
4. Upside down the sealant bottle, then
attach the bottle into the cutout of the air
compressor.
5. Attach the sealant/air hose onto the tyre
valve stem. Screw it until it is tight.
u Make sure the air valve is closed and the
air compressor is turned off.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
1Injecting Sealant and Air
WARNING
3
Tyre sealant contains substances that are
harmful and can be fatal if swallowed.
If accidentally swallowed, do not induce
vomiting. Drink plenty of water and get
medical attention immediately.
For skin or eye contact, flush with cool
water and get medical attention if
necessary.
Keep the sealant bottle out of the reach of children.
In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.
The sealant is latex based and can permanently stain
clothing and other materials. Be careful during
handling and wipe up any spills immediately.
Turn the air compressor off when connecting the air
compressor hose.
Continued
*
627