Honda CR-V 2017 Manual page 460

■
Starting to Drive
When the engine was started using the
1. Depress and hold the brake pedal, then press the ENGINE START/STOP button.
When the engine was started in any case
2. Keeping your right foot on the brake pedal, put the shift lever in
when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the parking brake and brake system indicator (red) goes off.
2 Parking Brake P. 517
■
Hill start assist system
Hill start assist keeps the brake engaged briefly to help to prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Change the gear position to ( D ,
downhill, then release the brake pedal.
* Not available on all models
button * on the keyless remote
S , or ( ( L * when facing uphill, or
1Remote Engine Start
•
The climate control system is activated in auto
mode.
When it is cold outside:
•
The defroster is activated.
•
The rear demister is activated.
•
The climate control system is activated in
recirculation mode.
1Starting to Drive
When the engine was started using the
on the keyless remote
The engine stops when the transmission is taken out
of before the ENGINE START/STOP button is
P (
pressed. Follow step 1 when starting to drive.
D . Select
( ( R
You can also release the parking brake by pressing
the electric parking brake switch while depressing the
brake pedal. When facing downhill, you can start
your vehicle more smoothly by manually releasing it
with the electric parking brake switch than by
releasing it with the accelerator pedal.
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
( R when facing
does not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
Hill start assist will operate even when VSA is
switched off.
uuWhen DrivinguStarting the Engine
*
button *
459