Honda CR-V 2017 Manual page 586

■
Low Beam Headlights
Holding clip
Bulb
Tab
Coupler
Right side
1. Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
Both side
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the headlight
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
uuReplacing Light BulbsuHeadlight Bulbs
1Headlight Bulbs
Holding clip
Insert a flat-tip screwdriver, lift and remove the centre
pin to remove the clip.
Centre pin
Insert the clip with the centre pin raised, and push
until it is flat.
Push until the
pin is flat.
585