Honda CR-V 2017 Manual page 436

■
Phone Setup
* Not available on all models
■
To pair a mobile phone (when there is
no phone paired to the system)
1. Select .
2. Select Yes.
3. Make sure your phone is in search or
discoverable mode.
4. Select Honda HFT from your phone.
u If you want to pair a phone from this
audio system, select Honda HFT Not
Found, Continue, and then select your
phone when it appears on the list.
If your phone does not appear, you can
select Refresh to search again.
5. The system gives you a pairing code on the
audio/information screen.
u Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
6. A notification appears on the screen if
pairing is successful.
u You can prioritize a Bluetooth® device at
the same time. Select Yes and then a
device you want to prioritize.
uuHands-Free Telephone SystemuHFT Menus
1Phone Setup
Your Bluetooth-compatible phone must be paired to
the system before you can make and receive hands-
free calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone's battery may drain faster when it is
paired to the system.
•
If your phone is not ready to be paired or is not
paired within three minutes, the system will time
out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFT.
: The phone is compatible with Bluetooth® Audio.
If there is an active connection to Apple CarPlay
pairing of additional Bluetooth-compatible devices is
unavailable.
Continued
* ,
435