Honda CR-V 2017 Manual page 630

Wheel Label
■
Distributing the Sealant in the Tyre
Speed Limit Label
11. Unplug the power plug from the accessory
power socket.
12. Unscrew the sealant hose from the tyre
valve stem. Reinstall the valve cap.
13. Apply the wheel label to the flat surface of
the wheel.
u The wheel surface must be clean to
ensure the label adheres properly.
1. Apply the speed limit label to the location
as shown.
2. Drive the vehicle for about 10 minutes or 5
km.
u Do not exceed 80 km/h.
3. Stop the vehicle in a safe place.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
Continued
*
629