Disposing Of The Controller - Casio GEC-10 User Manual

Disposing of the Controller

When disposing of the controller, be sure to first remove its built-in lithium ion battery
and send it in for recycling.
IMPORTANT!
• The battery of this controller is built-in and cannot be replaced by you. Contact your
retailer or a CASIO authorized service center to have the battery replaced.
• Make sure that the controller is turned off before removing the battery.
• The edges of the back cover are sharp. Take care not to cut your fingers when
removing it.
• When removing screws, use a precision Phillips tip screwdriver.
1.
Remove the four screws that secure the back
of the controller.
2.
Holding the back cover in the circled area,
rotate in the direction of the arrow to remove
the cover.
3.
Rotate the cover on the end of the product in
the direction indicated by the arrow to
remove it.
4.
Remove the six screws that secure the back
of the controller.
86
Appendix