Table of Contents
Advertisement
Sleep Mode
If you press [
] (Power) on the controller or if you do not perform any controller
operation for the time specified by the "Sleep" setting on the Setup menu (page 67)
while there is a Bluetooth wireless technology connection between the camera and
controller, the camera and controller will enter a sleep state. The operation lamp
slowly flashes green while the camera is in the sleep mode. To restore the controller
display, press any controller button. A low-power Bluetooth wireless technology
connection between the camera and controller is maintained even while they are in
the sleep mode, so operation is quickly enabled when you are ready to use them
again.
• If the distance between the camera and controller becomes to great or if
communication conditions become bad while the camera is in the sleep mode, the
connection may be dropped between them.
24
Quick Start Basics
Advertisement
Table of Contents
