First, Charge The Battery Prior To Use; To Charge With The Separately Available Usb-Ac Adaptor - Casio GEC-10 User Manual

NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.

First, charge the battery prior to use.

A USB-AC adaptor and power cord are not included with this product. Use the
included USB cable as shown below to charge.
IMPORTANT!
• USB charging compatible devices and power supply devices (which are sold as
usable for USB charging) normally meet specific standards. Do not use an inferior
device or one that does not meet the required standards. Doing so can cause
malfunction or failure of this controller. Also note that there are various types of
USB-AC adaptors with different standards that must be met in specific countries.
CASIO COMPUTER CO., LTD. shall be held in no way liable for any malfunction or
failure of the controller due to the use of inferior devices or devices that do not
meet required standards.

To charge with the Separately available USB-AC adaptor

Charging time: Approximately 2 hours 55 minutes
To obtain a CASIO genuine USB-AC adaptor, contact one of the companies in the
"Names of Members" column of the table in the TOURIST WARRANTY
CERTIFICATE.
While the controller is turned off, connect in the sequence shown below.
[USB] cover
Plug in the cable so the u mark on the small (micro USB) connector is facing towards
the LCD.
[USB] port
Micro USB cable
(included with controller)
Separately available
USB-AC adaptor
(AD-C53U)
15
Power cord
Quick Start Basics