• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector
as shown in the illustration.
To charge using a USB connection to a computer
Charging time: Approximately 2 hours 55 minutes
While the controller is turned off, connect in the sequence shown below (
[USB] cover
Plug in the cable so the u mark on the small (micro USB) connector is facing towards
the LCD.
• If the controller is on, hold down [
before connecting to the computer.
[USB] port
USB port
Micro USB cable
(included with controller)
] (Power) for about two seconds to turn it off
17
,
Computer
(power turned on)
Quick Start Basics
).