Shooting With Prerecord Cs - Casio GEC-10 User Manual

Shooting with Prerecord CS

Prerecord CS records a group of images that consists of what occurred before
[r/SLOW] is pressed, followed by images recorded in real-time.
1.
Select "Prerecord (Still image)" for the recording mode.
2.
Touch "SET".
3.
Touch an item and then change its setting.
High Speed CS
fps
Maximum CS
Shots
Pre-record CS
Shots
4.
When the setting is the way you want, touch
5.
Point the camera at the subject.
6.
Press [r/SLOW] or touch "Pre REC".
This starts Prerecord CS recording, which repeats for the number of times
specified by the setting. This starts pre-recording of a set of constantly updated
images. To stop Prerecord CS pre-recording, touch
7.
Press [r/SLOW] again.
This saves the pre-recorded images along with new real-time recorded images.
Specifies the CS shooting speed.
10fps (10 frames per second), 15fps (15 frames per
second), 30fps (30 frames per second)
Specifies the number of images shot by a single High
Speed CS operation.
5, 10, 20, 30
Number of images of the action that occurred before
[r/SLOW] is pressed.
3, 5, 10, 15, 20, 25
35
.
.
Recording Images