Table of Contents
Advertisement
5.
Register the camera on the G'z EYE app as instructed by the G'z EYE
app.
After registration is complete, establishing a Bluetooth wireless technology
connection between the smartphone and camera will cause the camera's current
date and time settings synchronize with the smartphone's settings.
• For information about how to configure wireless connection settings, refer to
the G'z EYE app manual (page 52).
• Next, establish a wireless LAN connection between the camera and
smartphone (page 55).
Establishing a Wireless LAN Connection Between the Camera
and Smartphone
Use the procedure below to establish a wireless connection between the camera and
a smartphone.
NOTE
• Turn on your smartphone's Wi-Fi before connecting.
1.
Touch the
2.
Touch "Shoot with phone".
3.
Touch "Start".
This will enable connection with a smartphone and the
camera will display a screen for input of an SSID and
password, and camera's [WLAN] lamp will flash blue.
4.
For the smartphone's Wi-Fi settings, enter the
camera's SSID and password to establish a wireless LAN connection
between the camera and smartphone.
When a wireless LAN connection is established between the camera and
smartphone, the camera's [WLAN] lamp will light blue, and the message "Start up
the phone app." appears on the controller's LCD.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
• This causes G'z EYE app and the controller to display the camera's SSID
(fixed) and password.
5.
On the smartphone, start up "G'z EYE" app.
(Wireless) icon.
Connecting the Camera with a Smartphone
55
SSID
Password
(Wireless Connection)
Advertisement
Table of Contents
