Formatting Built-In Memory Or A Memory Card; Resetting The Camera To Factory Defaults - Casio GEC-10 User Manual

Formatting Built-in Memory or a Memory Card (Format)
Procedure
MENU * " Setup" Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
If a memory card is not loaded in the camera, this operation will format its built-in
memory.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting camera built-in memory or a memory card will delete all images,
including protected images stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Resetting the Camera to Factory Defaults (Reset)
Procedure
MENU * " Setup" Tab * Reset
See page 88 for details about the camera's factory default settings.
The settings below are not reset.
Clock settings, date style, screen language, WLAN password
NOTE
• The reset operation does not unregister the camera and G'z EYE app (page 54).
68
Other Settings (Set Up)