Honeywell BW GasAlertMicro User Manual page 68

GasAlertMicro
User Manual
Figure 6. Replacing the Batteries
58
Table 13. Replacing the Batteries
Item
1 Detector front
2 Release buttons
3 Press tabs
4 Batteries
5 Battery tray
To replace the batteries, complete the following:
1. Ensure the detector is deactivated.
2. Press the two release buttons on the bottom of the
detector and pull out the battery tray.
3. Remove the batteries by pushing on the PRESS
tabs located on the back of the battery tray.
4. Replace the batteries according to the polarity
markings.
5. Replace the battery tray and push until the release
tabs click.
To preserve the life of the batteries, turn off the
detector when not in use.
Description
Note