Water Supply Hose; Connecting To The Mains Water Supply - Makita DCC501 Instruction Manual

Be careful not to hold the water-filled tank
NOTICE:
upright (with its lid-cap facing downwards) as water
drops may leak out of the vent pin hole.
1
► 1. Lid-cap 2. Vent pin hole

Water supply hose

CAUTION:
Be sure that the water supply lever
on the wheel cover is set in the "OFF" (O) position
before turning the water on.
Connecting to the mains water
supply
NOTE: The type of water outlet may vary depending
on your region of residence. Use an appropriate
faucet adapter or tap connector to attach the hose to
the mains water supply as necessary.
1. Connect the water supply plug to the supply water
outlet.
1
► 1. Supply water outlet 2. Water supply plug
2
2
12 ENGLISH
2. Unscrew the water supply cap attached to the
water supply tank.
2
1
► 1. Water supply cap 2. Water outlet
NOTICE:
Be careful not to lose the rubber washer
placed at the bottom of the water supply cap when-
ever you reassemble the cap.
3. Attach the water supply cap onto the cap plug of
the hose.
► 1. Water supply cap 2. Cap plug
4. Insert the hose with the water supply cap pointing
downwards into the water supply holder until it locks
with a click.
1
2
► 1. Water supply cap 2. Water supply holder
2
1