Makita DCO140 Instruction Manual
Cordless cut-out tool
Hide thumbs
Also See for DCO140:
- Instruction manual (65 pages) ,
- Technical information (8 pages) ,
- Instruction manual (49 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DCO140
Summary of Contents for Makita DCO140
- Page 1 INSTRUCTION MANUAL Cordless Cut-Out Tool DCO140 DCO180 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model DCO140 DCO180 Collet chuck capacity 3 mm, 6 mm or 1/8", 1/4" 3 mm, 6 mm or 1/8", 1/4" Rated speed (n)/ No load speed (n 30,000 min 30,000 min Overall length 313 mm 313 mm Net weight 1.6 kg... -
Page 3: Ec Declaration Of Conformity
Power tools can produce electromagnetic fields WARNING: The vibration emission during actual (EMF) that are not harmful to the user. However, use of the power tool can differ from the declared val- users of pacemakers and other similar medical ue(s) depending on the ways in which the tool is used devices should contact the maker of their device and/ especially what kind of workpiece is processed. - Page 4 Power tool use and care Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or tem- Do not force the power tool. Use the correct perature above 130 °C may cause explosion. power tool for your application. The correct power tool will do the job better and safer at the Follow all charging instructions and do not rate for which it was designed.
- Page 5 It will Avoid storing battery cartridge in a con- also void the Makita warranty for the Makita tool and tainer with other metal objects such as charger. nails, coins, etc.
-
Page 6: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Only for battery cartridges with the indicator CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjust- ing or checking function on the tool. Installing or removing battery cartridge ►... - Page 7 Overheat protection Accidental re-start preventive function This protection works when the tool or battery is over- heated. In this situation, let the tool and battery cool before turning the tool on again. Even if the battery cartridge is installed on the tool with the slide switch in the "I (ON)"...
-
Page 8: Operation
When cutting straight line, clamp a straight board firmly to the material and use it as a guide. Move the tool in the direction of the arrow with the shoe base flush with the side of the guide board. When the cut is complete, turn the tool off and wait for the bit to stop rotating and then carefully remove it from the material. - Page 9 Vacuum cover (optional accessory) To perform cleaner operations, use the vacuum cover and connect the tool to Makita vacuum cleaner or dust collector. ► 1. Thumb screw 2. Circular guide 3. Shoe 4. Loosen 5. Tighten To adjust the cutting depth, loose the thumb screw and then slide the shoe with the circular guide.
-
Page 10: Replacing Carbon Brushes
Connect the hose of a vacuum cleaner/dust collector to time. Use only identical carbon brushes. the vacuum cover. When connecting to Makita vacuum cleaner, use an optional hose 28 mm in inner diameter. ► 1. Holder cap cover 2. Screwdriver Insert the top end of slotted bit screwdriver into the notch in ►... -
Page 11: Optional Accessories
CAUTION: • These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885347A227 20200831 www.makita.com...