Makita LS0716FL Instruction Manual page 10

1
1. Scale label
2. Adjusting screw
3. Lever
2
1
1. Scale label
2. Window
3. Green
1
1. Adjusting screw
2. Clamping screw
3. Lever
1
1. Adjusting screw
10
Setting the fine-adjusting range of bevel angle
006959
Make sure that the entire part of window display on the scale label is green. If
2
it not so, the fine-adjusting range of bevel angle becomes small.
Loosen the lever, turn the fine adjusting screw until the entire part of the win-
dow display becomes green.
3
006960
3
1. Loosen the lever at 0° bevel angle. At this time, make sure that the
006961
clamping screw is loosened.
3
2
2. Set the fine-adjusting range of bevel angle with the fine adjusting screw
as follows;
(1)
006962
When the green part in the window on the scale label is located on
the left side,
Turn the fine-adjusting screw clockwise and the green part moves
to the right. Turn it clockwise until the entire part of the window dis-
play becomes green.