Transfers A Call; Mute Phone; Voicemail - Cisco 7821 Quick Start Manual

Hide thumbs Also See for 7821:

Cisco IP Phone 7821 Quick Start Guide

Step 2 To resume a call from hold, press the flashing green line button, Resume or Hold

5) TRANSFERS A CALL

Step 1 From a connected call (not on hold), press the Transfer button

Step 2 Enter the transfer recipient's phone number.

Step 3 Press the Transfer button

recipient answers).

The transfer completes.

Mute allows you to block audio input for your handset, headset, and speakerphone, so that you

can hear other parties on the call but they cannot hear you.

Step 1 While on a call, press the Mute button

on.

Step 2 Press Mute again to turn Mute off.

New message indicators:

• A solid red light on your

handset

• "New Voicemail" message on

the screen

Listen to messages

Step 1 Press the Messages button

Step 2 As the welcome message plays, enter default pin number 1234, and press the pound key

(#) (please contact Tech Support if you would like to change default pin number).

Step 3 After listening to a message (end of message), press

you want to save, and

again or the Transfer softkey (before or after the

to delete that message.

UNIS Tech Support Office

. The button glows to indicate that Mute is

if you want to repeat it. Press

Table of Contents