Table of Contents
Advertisement
6. Terminal configurations
Connecting to a virtual private network
60
The terminal supports connection to virtual private networks (VPNs). This
section describes how to add and connect to VPNs. To configure a VPN, users
must consult your network administrator. Users can view and change VPN
settings in the Application Settings.
Note: Before accessing VPNs, users need to set a lock screen password.
Add VPNs
Before connecting to a VPN, users must first add the relevant information of the
VPN.
1.
Enter Application Settings screen.
2.
Tap More under Wireless and Networks.
3.
Tap VPN.
4.
Tap Adding +.
5.
Input the VPN information.
6.
Tap Save, and VPN name will be displayed in the list.
Connect to VPN
1.
Enter Application Settings screen.
2.
Tap More under Wireless and Network.
3.
Tap VPN.
4.
Tap the VPN name in the list, and enter the certificate information based on
the tips.
5.
Tap Connect. The terminal gets connected to the VPN, and the status
icons and notification will be displayed. To disconnect from the VPN, tap
the notification.
Edit VPN information
1.
Enter Application Settings screen.
2.
Tap More under Wireless and Network.
3.
Tap VPN.
4.
Long press the name of the VPN to be edited and select Editing Networks
from the list.
5.
Edit VPN information based on your needs.
ScanPal EDA50 Enterprise Hybrid Device User Guide
Advertisement
Table of Contents
