Connecting To A Virtual Private Network - Honeywell ScanPal Series User Manual

Connecting to a virtual private network

56
The Handheld Computer supports connection to virtual private networks
(VPNs). This section describes how to add and connect to VPNs. To
configure a VPN, users must consult your network administrator. Users
can view and change VPN settings in the Application Settings.
Note: Before accessing VPNs, users need to set a lock screen
password.
Add VPNs
Before connecting to a VPN, users must first add the relevant
information of the VPN.
1. Enter Application Settings screen.
2. Tap More under Wireless and Networks.
3. Tap VPN.
4. Tap Adding +.
5. Input the VPN information.
6. Tap Save, and VPN name will be displayed in the list.
Connect to VPN
1. Enter Application Settings screen.
2. Tap More under Wireless and Network.
3. Tap VPN.
4. Tap the VPN name in the list, and enter the certificate information
based on the tips.
5. Tap Connect. The Handheld Computer gets connected to the VPN,
and the status icons and notification will be displayed. To
disconnect from the VPN, tap the notification.
Edit VPN information
1. Enter Application Settings screen.
2. Tap More under Wireless and Network.
3. Tap VPN.
4. Long press the name of the VPN to be edited and select Editing
Networks from the list.
User Guide for ScanPal EDA60K-0 Handheld Computer