Powering On; Unlocking The Screen - Honeywell ScanPal EDA50K User Manual

Powering on

Unlocking the screen

ScanPal EDA50 Enterprise Hybrid Device User Guide
After the battery is fully charged and installed into ScanPal EDA50, turn on it for
the first time:
Press down and then release the power key.
Please note: after complete the installation instructions, the welcome interface
will not appear again. The interface appears as locked screen interface after
each time you turn on the terminal.
Every time you turn on the terminal, you need to unlock the screen.
•
Slide the lock icon to any edge of the screen to unlock it.
•
After the EDA50 is deployed, we suggest you to set password to protect
your terminal. Tap All Applications > Settings > Security > Encryption.
1. Features of ScanPal EDA50 Enterprise Hybrid Device
17