Table of Contents
Advertisement
Terminal disinfection
ScanPal EDA50 Enterprise Hybrid Device User Guide
The medical version of the terminal supports wiping with chemical disinfectants.
Chemical disinfectants supported including:
•
Medical alcohol (75% concentration)
•
Hydrogen peroxide (3% concentration)
•
Isopropyl alcohol (70% concentration)
•
Sodium hypochlorite solution (500PPM concentration)
•
Peracetic acid (0.02% concentration)
Warnings: this product includes non user-serviceable parts inside.
Disassembling the product may prevent warranty and cause internal
damages to the product.
Note: We advise you not to open the battery cover or remove the battery,
so as to avoid the liquid flowing into the internal part of the terminal from
the SIM card and SD card interface.
1.
Press the power key to enter standby mode.
2.
Dip a clean cloth in disinfectants.
3.
Wipe the scanning window, camera and flash area, avoiding touching these
areas with hard objects or abrasive materials.
4.
Make sure the terminal is fully dry before using it again.
7. Management and maintenance
71
Advertisement
Table of Contents
