Table of Contents
Advertisement
5. Using Camera
Color camera
Adjusting camera and video settings
Zooming
Changing camera settings
Taking photos
50
EDA50 is equipped with 5 megapixels color camera which can be used to take
photos and videos. The camera and flash light are located on the back of the
terminal. Tap Photo
the terminal.
Adjust the camera and video settings in the Camera apps.
Focus adjustment is realized by zooming actions of the fingers on the screen.
Place two fingers on the screen at the same time, then:
•
Separate the two fingers in opposite directions to zoom in the images
(enlarge objects).
•
Fold the two fingers in opposite directions to zoom out the images
In order to obtain the best results when taking photos, users can change the
camera settings beforehand.
1.
Tap All Applications and then tap Camera
2.
Tap the Flash Light icon on the bottom right to view Camera Options.
3.
Tap HDR or any icons to change the basic settings of the camera.
•
When HDR is enabled, the terminal will automatically capture multiple
photos and composite them into one to achieve the best possible
image quality.
•
Enable or disable various options, like viewfinder mode, storage
location and image size.
1.
Tap All Applications and then tap Camera
2.
Take the screen as a viewfinder and move the terminal until you get the
images you want to capture.
3.
Tap the screen to focus. By default, the camera automatically senses the
ambient light, and the flashlight will be opened if necessary.
Gallery app to view all the photos and videos stored on
ScanPal EDA50 Enterprise Hybrid Device User Guide
.
.
Advertisement
Table of Contents
