Xcommand Video Presentationpip Set; Xcommand Video Presentationview Set; Xcommand Video Selfview Set - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Video PresentationPIP Set

Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
Position
UpperRight
Select one of the predefined positions.

xCommand Video PresentationView Set

Set the presentation view mode
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationView Set View:
where
: Default/Maximized/Minimized
View
Select Default when you want the presentation to be viewed with the default settings
for the codec. Select Maximized when you want the presentation to be displayed in full
screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration
Position
View
xCommand xCommand

xCommand Video Selfview Set

Sets self-view on/off and specifies its size and position. If the parameter is not specified,
current value is used.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Selfview Set [Mode: Mode] [FullscreenMode: FullscreenMode]
[PIPPosition: PIPPosition] [OnMonitorRole: OnMonitorRole]
where
: On/Off
Mode
Selfview is set to on or off.
: On/Off
FullscreenMode
Choose between displaying the self-view in full screen or as picture-in-picture.
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
PIPPosition
UpperRight
Select the position for the self-view image.
: First/Fourth/Second/Third
OnMonitorRole
Displays self-view on monitors with this role.
132
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.