Xcommand Conference Speakerlock Set; Diagnostics Commands; Xcommand Diagnostics Run - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Conference SpeakerLock Set

For manually locking one of the speakers to the prominent speaker position. This overrides the
default voice switching.
Requires user role: ADMIN, USER
USAGE:
xCommand Conference SpeakerLock Set Target:
where
: local/remote
Target
Identifies local or remote participant.
: Integer (0..65534)
CallId
Identify CallID for the remote participant. Only relevant if Target is set to "remote".
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration
Target [CallId: CallId]
xCommand xCommand

Diagnostics commands

xCommand Diagnostics Run

This command runs self-diagnostics commands on the system.
Requires user role: ADMIN
USAGE:
xCommand Diagnostics Run [ResultSet: ResultSet]
where
: Alerts/All/None
ResultSet
You can filter the diagnostics results to alerts, all or none. If not set, the result will show
all results.
106
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.