Xstatus Video Output Connector [N] Connecteddevice Preferredformat; Xstatus Video Output Connector [N] Monitorrole; Xstatus Video Output Connector [N] Resolution Height; Xstatus Video Output Connector [N] Resolution Refreshrate - Cisco TelePresence SX20 Codec Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX20 Codec:
Table of Contents

Advertisement

Cisco TelePresence SX20 Codec
Introduction

xStatus Video Output Connector [n] ConnectedDevice PreferredFormat

Shows the preferred input format of the monitor connected to the HDMI port as defined in the
monitors EDID. This is not necessarily the format the codec is sending out.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
String
Example:
xStatus Video Output Connector 1 ConnectedDevice PreferredFormat
*s Video Output Connector 1 ConnectedDevice PreferredFormat: "1920x1080@60Hz"
** end

xStatus Video Output Connector [n] MonitorRole

Describes which video stream is shown on the device that is connected to the video output
connector.
First/Second/Third: The role of the monitor in a multimonitor setup. In a singlemonitor setup,
there is no difference between First, Second and Third.
PresentationOnly: Shows presentation video stream if active.
Recorder: Shows all participants, including the local main video. If active, shows also the
presentation.
Requires user role: ADMIN, USER
Value space of the result returned:
First/Second/Third/PresentationOnly/Recorder
Example:
xStatus Video Output Connector 1 MonitorRole
*s Video Output Connector 1 MonitorRole: First
** end
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API
xConfiguration
xCommand

xStatus Video Output Connector [n] Resolution Height

Shows the resolution height (in pixels) for the video output connector.
Requires user role: ADMIN, USER
Value space of the result returned:
120..3000
Example:
xStatus Video Output Connector 1 Resolution Height
*s Video Output Connector 1 Resolution Height: 1080
** en

xStatus Video Output Connector [n] Resolution RefreshRate

Shows the resolution refresh rate (Hz) for the video output connector.
Requires user role: ADMIN, USER
Value space of the result returned:
1..300
Example:
xStatus Video Output Connector 1 Resolution RefreshRate
*s Video Output Connector 1 Resolution RefreshRate: 60
** end

xStatus Video Output Connector [n] Resolution Width

Shows the resolution width (in pixels) for the video output connector.
Requires user role: ADMIN, USER
Value space of the result returned:
176..4000
Example:
xStatus Video Output Connector 1 Resolution Width
*s Video Output Connector 1 Resolution Width: 1920
** end
187
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents