Automatic Programmes - AEG BS730470MM User Manual

Table of Contents

Advertisement

3. Use
or
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the display.
The appliance deactivates.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Deactivate the appliance.
7.5 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature (refer
to "Setting the oven function" and
"Changing the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch
flashes in the display.
4. Touch
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
There are 25 automatic programmes.
Use an automatic programme or recipe
or
to set the END and
to confirm. First you set the
again and again until
to set the SET+GO
and
with an
1. Touch
and "00" flash in the display.
2. Use
First you set the seconds, then the
symbol
minutes and the hours.
3. Use
MINDER and
4. Touch both
reset the set time.
5. Touch
starts automatically after five
seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and
flash in the display.
6. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.7 Setting the Time delay
function
The DURATION
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
dot shows which clock
function is on in the Clock /
residual heat display.
when you do not have the knowledge or
experience on how to prepare a dish.
The display shows the default cooking
times for all automatic programmes.
ENGLISH
.
to switch between options.
or
to set the MINUTE
to confirm.
and
at once to
or the MINUTE MINDER
and END
function (refer
with a dot and
. The
15
can be

Advertisement

Table of Contents
loading

Table of Contents